AMPLIFIERS - MISC | | |
| Description | Photo | Price |
KICKER 46CXA3604
4-Channel Amplifier
65X4 AMPLIFIER |  | 46cxa3604
$229.95
 |
KICKER 47VK6
6GA AMP KIT
|  | 47vk6
$96.00
|
PLANET AUDIO AC1500-1M
1500 WATT MONOBLOCK AMP
|  | ac1500-1m
$149.95
|
OMNI12 AK0GOFC
O GAUGE AMP KIT
| | ak0gofc
$175.00
|
RECOIL ALOC2
2 CHANNEL LOC
| | aloc2
$19.95
|
METRA AX-LOC2-2
4CH Active Line Output Converter USE WITH LOC-XXX HARNESSES
Easily add a subwoofer to your vehicle by connecting this vehicle-specific Active LOC T-harness by Axxess. It is designed to work with Axxess LOCs, and is versatile enough to be compatible with most sound processors, line output converters, and amplifiers with high-level inputs. This T-harness provides convenient access to the speaker-level output signals from your factory radio, making installation easier. It provides signal connections for your system, including constant 12-volt (10-amp fuse), ground, and remote turn-on leads. It simplifies the connection process for devices like active signal processors. This T-harness is easily installed by disconnecting the factory radio and connecting the two T-harness plugs. One plug connects to the radio, while the other snaps into the previously removed plug. This setup allows the radio to remain fully connected to your vehicle while providing additional wires for adding an amplifier.The T-harness is equipped with mating 8-pin plugs that remain connected when installers are adding a subwoofer amplifier, ensuring that the factory speakers continue to receive power from the radio. On the radio side of the T-harness, there is a pre-wired speaker-level output audio signal for a dedicated subwoofer amplifier or powered subwoofer, making the installation process highly versatile and compatible with various setups. Fits 2018-2023 Ford vehicles 32-pin T-harness for non-amplified systems Add a standalone subwoofer or a complete audio system Harness connections: 12V (with in-line 10A fuse) Ground Remote turn-on wire with butt connector | | ax-loc2-2
$109.50
|
METRA AX-LOC2-4
4CH Active Line Output Converter USE WITH LOC-XXX HARNESSES
Easily add a subwoofer to your vehicle by connecting this vehicle-specific Active LOC T-harness by Axxess. It is designed to work with Axxess LOCs, and is versatile enough to be compatible with most sound processors, line output converters, and amplifiers with high-level inputs. This T-harness provides convenient access to the speaker-level output signals from your factory radio, making installation easier. It provides signal connections for your system, including constant 12-volt (10-amp fuse), ground, and remote turn-on leads. It simplifies the connection process for devices like active signal processors. This T-harness is easily installed by disconnecting the factory radio and connecting the two T-harness plugs. One plug connects to the radio, while the other snaps into the previously removed plug. This setup allows the radio to remain fully connected to your vehicle while providing additional wires for adding an amplifier.The T-harness is equipped with mating 8-pin plugs that remain connected when installers are adding a subwoofer amplifier, ensuring that the factory speakers continue to receive power from the radio. On the radio side of the T-harness, there is a pre-wired speaker-level output audio signal for a dedicated subwoofer amplifier or powered subwoofer, making the installation process highly versatile and compatible with various setups. Fits 2018-2023 Ford vehicles 32-pin T-harness for non-amplified systems Add a standalone subwoofer or a complete audio system Harness connections: 12V (with in-line 10A fuse) Ground Remote turn-on wire with butt connector | | ax-loc2-4
$109.50
|
METRA AXLOC-CHH2-2
Active LOC T-Harness - 2011-2023 Chrysler, Jeep, Dodge, RAM
WITH 2 CHANNEL LOC
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | axloc-chh2-2
$145.50
|
METRA AXLOC-CHH2-4
Active LOC T-Harness - 2011-2023 Chrysler, Jeep, Dodge, RAM
WITH 4 CHANNEL LOC
This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
4-channel: 2 in, 4 out
Max input level: 20V / 100W @ 20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | axloc-chh2-4
$145.50
|
METRA AXLOC-TY3
2-Channel line Output Converter - Fits Toyota 2018-Up
This vehicle-specific line output converter features a T-harness that installs quickly and makes it easy for installers to add an amplifier for subwoofers or speakers to a factory radio. It is designed to provide (2) channels of low-level audio output from the factory system, with 55 watts per channel. A Gain Controller is included to adjust overall output, and it is 12v-500mA remote-wire activated with signal sense. Designed to provide (2) channels of low-level audio output from the factory system Allows for the installation of an amplifier for speakers or subwoofers Gain Controller included to adjust the overall output 12v-500mA remote wire activated with signal sense 55 watts per channel Designed for non-amplified vehicles. | | axloc-ty3
$59.95
|
RECOIL DB12
1 IN 2 OUT DISTRIBUTION BLOCK
| | db12
$19.95
|
SSL EV4-400
4 CHANNEL AMP
|  | ev4-400
$169.95
|
KENWOOD KAC-M8005
5 CHANNEL AMP
| | kac-m8005
$350.00
|
ELITE KIT4PRO
4 GAUGE AMP KIT
| | kit4pro
$129.95
|
ALPINE KTA-200M
Mono Power Pack AMP Subwoofer Amplifier
The KTA-200M Mono Power Pack Amplifier produces 400-watts of Alpine’s Exclusive Dynamic Peak Power for big subwoofer power in a small space. |  | kta-200m
$249.00
|
ALPINE KTA-30FW
4-Channel Amplifier
|  | kta-30fw
$369.95
|
AUDIO CONTROL LC-1-800
800 WATT AMP
|  | lc-1-800
$500.00
|
AUDIO CONTROL LC-51300
5 CHANNEL AMP
|  | lc-51300
$849.99
|
AUDIO CONTROL LCQ-1
line out converter with eq
Individual equalization controls for the front, rear and subwoofer channels for simple yet precise system tuning AccuBASS™ processing for correction of bass roll-off Six channels of active speaker level inputs – accept up to 400 watts per channel Optional ACR-2 Remote allows for control of the subwoofer level plus EQ bypass which makes it ideal for demonstration applications Internal Channel Summing – For interfacing with factory installed amplifiers with built-in crossovers GTO™ (Great Turn-On) Circuit – Powers up the LCQ-1 when it detects signal on the speaker level input Compact (6”x 6”) chassis allowing for ease of installation | | lcq-1
$329.95
|
METRA LOC-CHH1-2
Active LOC T-Harness - 2007-2020 Chrysler, Jeep, Dodge, RAM
WITH 2 CHANNEL LOC
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-chh1-2
$162.50
|
METRA LOC-CHH1-4
Active LOC T-Harness - 2007-2020 Chrysler, Jeep, Dodge, RAM
WITH 4 CHANNEL LOC
This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
4-channel: 2 in, 4 out
Max input level: 20V / 100W @ 20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz
| | loc-chh1-4
$162.50
|
METRA LOC-CHH3-2
Active LOC T-Harness - 2021-Up* Chrysler, Jeep, Dodge, RAM
WITH 2 CHANNEL LOC
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-chh3-2
$169.50
|
METRA LOC-CHH3-4
Active LOC T-Harness - 2021-Up* Chrysler, Jeep, Dodge, RAM
WITH 4 CHANNEL LOC This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-chh3-4
$169.50
|
METRA LOC-FDH2-2
Vehicle-Specific Active LOC T-Harness - Fits 2011-2020 Ford
WITH 2 CHANNEL LOC
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-fdh2-2
$169.50
|
METRA LOC-FDH2-4
Vehicle-Specific Active LOC T-Harness - Fits 2011-2020 Ford
WITH 2 CHANNEL LOC. This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-fdh2-4
$169.50
|
METRA LOC-FDH3-2
Vehicle-Specific Active LOC T-Harness - Fits 2018-2023 Ford
WITH 2 CHANNEL LOC
32-pin T-harness for non-amplified systems
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-fdh3-2
$165.90
|
METRA LOC-FDH3-4
Vehicle-Specific Active LOC T-Harness - Fits 2018-2023 Ford
WITH 4 CHANNEL LOC This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-fdh3-4
$165.90
|
METRA LOC-GMH3-2
LOC T-Harness - 2019-Up* Chevy - GMC RPO Code IOS, IOT, IOU
WITH 2 CHANNEL LOC Fits 2019-Up* Chevy and GMC vehicles with RPO code IOS / IOT / IOU
LOC T-harness for non-amplified systems
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-gmh3-2
$165.50
|
METRA LOC-GMH3-4
LOC T-Harness - 2019-Up* Chevy - GMC RPO Code IOS, IOT, IOU
WITH 4 CHANNEL LOC Fits 2019-Up* Chevy and GMC vehicles with RPO code IOS / IOT / IOU LOC T-harness for non-amplified systems This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-gmh3-4
$165.50
|
METRA LOC-GMH4-2
LOC T-Harness - 2019-Up* Chevy and GMC with RPO Code IOR
WITH 2 CHANNEL LOC. 2019-Up* Chevy and GMC with RPO Code IOR
LOC T-harness for non-amplified systems
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-gmh4-2
$189.50
|
METRA LOC-GMH4-4
LOC T-Harness - 2019-Up* Chevy and GMC with RPO Code IOR
WITH 4 CHANNEL LOC. 2019-Up* Chevy and GMC with RPO Code IOR LOC T-harness for non-amplified systems This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-gmh4-4
$189.50
|
METRA LOC-TYH1-2
Vehicle-Specific 2 channel Active LOC T-Harness - 1985-2020 Toyota
Includes AX-LOC2.2
10-pin and 6-pin T-harness for non-amplified systems and 2 channel LOC
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz
| | loc-tyh1-2
$169.50
|
METRA LOC-TYH1-4
Vehicle-Specific 2 channel Active LOC T-Harness - 1985-2020 Toyota
Includes AX-LOC2.4 10-pin and 6-pin T-harness for non-amplified systems This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-tyh1-4
$169.50
|
METRA LOC-TYH2-2
Vehicle-Specific Active LOC T-Harness - 2018-2021 Toyota
COMES WITH 2 CHANNEL LOC
10-pin and 28-pin T-harness for non-amplified systems
This 2-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great! This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system.
Features
2-channel: 2 in, 2 out
Max input level: 20V / 100W @20K Ohm
Operating voltage: 9V-16V
Trigger selection: REM / DC / AUDIO
Turn on trigger (DC): 3V-7V
Output max @13.8V: 9.5V RMS
Input impedance selection: 20 / 60 / 20k Ohm
Ground selection: GND / ISO / 200 Ohm
Gain adjustment: – 28dB to +1dB
Input sensitivity: 0.5V-20V
Signal to noise: >110dB @ 6.4V Output
THD+N (Total Harmonic Distortion): <0.01%
Frequency response: 20Hz-20kHz | | loc-tyh2-2
$195.50
|
METRA LOC-TYH2-4
Vehicle-Specific Active LOC T-Harness - 2018-2021 Toyota
COMES WITH 4 CHANNEL LOC 10-pin and 28-pin T-harness for non-amplified systems This 4-channel LOC has universal applications and enables installers to add aftermarket amplifiers to OEM source units to make factory systems sound great. This premium product features incredible input power capabilities, a load selector, variable gain controls with clipping indicators, enhanced output controls, selectable ground isolation, and noise isolation countermeasures. This product is ideal for adding amplifiers to an audio system that does not have RCA outputs or when replacing a factory radio and retaining the factory amplified system. It provides a pure, noise-free signal for any type of audio system. Features 4-channel: 2 in, 4 out Max input level: 20V / 100W @ 20K Ohm Operating voltage: 9V-16V Trigger selection: REM / DC / AUDIO Turn on trigger (DC): 3V-7V Output max @13.8V: 9.5V RMS Input impedance selection: 20 / 60 / 20k Ohm Ground selection: GND / ISO / 200 Ohm Gain adjustment: – 28dB to +1dB Input sensitivity: 0.5V-20V Signal to noise: >110dB @ 6.4V output THD+N (Total Harmonic Distortion): <0.01% Frequency response: 20Hz-20kHz | | loc-tyh2-4
$195.50
|
PAC-AUDIO LPHTY01
TOYOTA INTERFACE HARNESS
| | lphty01
$69.95
|
DIAMOND AUDIO MICRO2V2
MICRO 2-Ch 250W X 2
|  | micro2v2
$399.95
|
ROCKFORD FOSGATE PLC2
Remote Punch Level Control
| | plc2
$39.99
|
ALPINE R-A60F
4 CHANNEL AMP
|  | r-a60f
$499.95
|
ALPINE R-A75M
MONO AMP
|  | r-a75m
$499.00
|
METRA R5A01
3800W 1/0 AWG Amp Kit with RCA Cable - Pro Series
Tinned oxygen-free copper 17 ft Pro Series dual-twist RCA cable 17 ft 1/0 AWG OFC power cable 3 ft 1/0 AWG OFC ground cable 17 ft 18 AWG turn-on wire (1) ANL fuse holder with 200 AMP fuse (4) Nickel plated 1/0 AWG ring terminals | | r5a01
$175.00
|
METRA R5A4
1500W 4 AWG Amp Kit with RCA Cable - Pro Series
Tinned oxygen-free copper 17 ft Pro Series dual-twist RCA cable 17 ft 4 AWG OFC power cable 3 ft 4 AWG OFC ground cable 17 ft 18 AWG turn-on wire (1) MANL fuse holder with 100 AMP fuse (2) Nickel plated 4 AWG ring terminals | | r5a4
$89.95
|
RECOIL RCK4
4 GA AMP KIT
| | rck4
$94.50
|
RECOIL RCK8
8 GA AMP KIT
| | rck8
$79.95
|
DS18 S-1100-2
1100 WATT 2 CHANNEL AMP
|  | s-1100-2
$109.95
|
ALPINE S-A32F
4 CHANNEL AMP
|  | s-a32f
$250.00
|
ROCKFORD FOSGATE TM1000X5AD
5 CHANNEL AMP
|  | tm1000x5ad
$800.00
|
METRA V10-AK4
4 AWG Amp Kit
| | v10-ak4
$159.95
|
AMPLIFIERS - 2 CHANNEL | | |
| Description | Photo | Price |
DB DRIVE NEO-M2
2 channel marine amp
|  | neo-m2
$169.95
|
AMPLIFIERS - 4 CHANNEL | | |
| Description | Photo | Price |
ROCKFORD FOSGATE P400X4
400watt 4 channel amp
|  | p400x4
$399.99
|
AMPLIFIERS - 4 CHANNEL AMPLIFIER | | |
| Description | Photo | Price |
KICKER 43CXA3004
600 Watt Peak (300W RMS) CX Series 4-Channel 4X75 AMP
|  | 43cxa3004
$199.99
|
AMPLIFIERS - ALPINE | | |
| Description | Photo | Price |
ALPINE KTA-450
4-Channel Power Pack Amplifier
|  | kta-450
$229.00
|
ALPINE KTP-445A
Alpine Head Unit Power Pack
|  | ktp-445a
$190.00
|
ALPINE KTP-445U
Universal Power Pack
Power Rating: 45W x 4 @ 4Ω/2Ω |  | ktp-445u
$289.95
|
ALPINE S-A55V
5-Channel Power Amplifier
|  | s-a55v
$429.99
|
AMPLIFIERS - AUDIO CONTROL | | |
| Description | Photo | Price |
AUDIO CONTROL ACM-1300
ONE CHANNEL MICRO
- AudioControl Micro 300 1-Channel Amplifier |  | acm-1300
$349.99
|
AUDIO CONTROL ACM-2300
TWO CHANNEL MICRO
- AudioControl Micro 300 2-Channel Amplifier |  | acm-2300
$349.95
|
AUDIO CONTROL LC-4800
4 ch amplifier accubass
High-Power 4/3/2 Channel Amplifier with AccuBass |  | lc-4800
$649.99
|
AUDIO CONTROL LC-61200
6 CH AMPLIFIER ACCUBASS
1200W RMS LC Series Class-D 6-Channel 2-Ohm Stable Amplifier |  | lc-61200
$1299.99
|
AMPLIFIERS - AUDIO CONTROL AMPLIFIERS | | |
| Description | Photo | Price |
AUDIO CONTROL LC-11500
SUB AMPLIFIER ACCUBASS
Mono subwoofer amplifier — 1,500 watts RMS x 1 at 2 ohms |  | lc-11500
$849.99
|
AUDIO CONTROL LC-1800
Sub AMPLIFIER accubass
Mono subwoofer amplifier — 800 watts RMS at 2 ohms |  | lc-1800
$499.00
|
AMPLIFIERS - AUDIO CONTROL DSP | | |
| Description | Photo | Price |
AUDIO CONTROL DM-608
DSP BOX 6 in and 8 out
|  | dm-608
$645.00
|
AUDIO CONTROL DM-810
DSP BOX 8 in and 10 out
|  | dm-810
$749.99
|
AMPLIFIERS - AUDIO CONTROL DSP AMPLIFIER | | |
| Description | Photo | Price |
AUDIO CONTROL D4-800
DSP AMP - D Series 4-channel car amplifier with digital signal processing — 125 watts x 4
4-channel car amplifier with digital signal processing |  | d4-800
$899.99
|
AUDIO CONTROL D6-1200
6 ch dsp amplifier accubassX
6 ch dsp amplifier accubass matrix dsp amplifier
high-power 6 channel dsp matrix amplifier with accubass® |  | d6-1200
$999.99
|
AMPLIFIERS - AUDIO CONTROL EQUALIZER | | |
| Description | Photo | Price |
AUDIO CONTROL FOUR-1I
In-Dash Equalizer/Line Driver with Second Source Input
BEING USED IN THE SHOP AREA. |  | four-1i
$299.99
|
AMPLIFIERS - BASS KNOB | | |
| Description | Photo | Price |
KICKER 46CXARC
Dash-mount wired remote for select Kicker CX amplifiers
| | 46cxarc
$59.95
|
AUDIO CONTROL ACR-1
Bass knob
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). |  | acr-1
$49.95
|
AUDIO CONTROL ACR-2
Endless rotary encoder
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). |  | acr-2
$45.94
|
AUDIO CONTROL ACR-3
Endless rotary encoder
Add remote level control for your AudioControl processor or amplifier. This is the replacement remote for the Epicenter. Comes with a 20 foot cable and removable mounting enclosure (for custom dash installations). |  | acr-3
$45.00
|
AUDIO CONTROL ARC-3
Remote base knob
| | arc-3
$49.95
|
METRA AX-BASSKNOB
Subwoofer Control for the AX-DSP
•Add-on accessory for the AX-DSP •Allows quick independent control of the subwoofer gain •Mounting hardware included •Must be used with the part AX-DSP |  | ax-bassknob
$31.95
|
ALPINE RUX-KNOB2
Remote Bass Knob
The optional RUX-KNOB.2 remote bass control knob plugs right in to select Alpine amplifiers for quick direct subwoofer control to make bass adjustments on the fly. | | rux-knob2
$49.95
|
AMPLIFIERS - BLUETOOTH | | |
| Description | Photo | Price |
AUDIO CONTROL AC-BT24
AudioControl AC-BT24 Bluetooth Adapter for an AudioControl DSP Device
Bluetooth® adapter for an AudioControl DSP device |  | ac-bt24
$139.95
|
AMPLIFIERS - COMPACT AMP | | |
| Description | Photo | Price |
KICKER 47KEY2004
Compact 4-channel car amplifier with automatic tuning DSP — 50 watts RMS x 4
|  | 47key2004
$249.95
|
AMPLIFIERS - KICKER | | |
| Description | Photo | Price |
KICKER 41DXA1252
2-Channel D-Series 125W Full Range Class A/B Car Amplifier
General Features: D-Series 2-Channel Class AB Car Amplifier RMS Power Rating: 4 ohms: 30 watts x 2 chan. 2 ohms: 60 watts x 2 chan. Bridged, 4 ohms: 125 watts x 1 chan. Max power output: 250 watts 2 or Mono channel operation Speaker-level (high-level) inputs with signal sensing for automatic turn-on Signal-to-noise ratio: >95dB Built-in electronic crossover for precise speaker matching FIT technology Fail-Safe Integration Technology Advanced circuitry for superior power, clarity and dependability Kicker EQ Bass Boost control(0 to +12 dB bass boost at 40 Hz) Allows users to dial in the perfect sound Variable high-pass filter (50-200 Hz, 24 dB/octave) Variable low-pass filter (50-200 Hz, 24 dB/octave) 8-gauge power and ground wiring is required for installation Contact us for information regarding a discount on select amplifier kits from our website when purchased together with this amplifier Dimensions: 8-1/8 W x 7-3/16 D x 2-3/8 H Authorized Internet Dealer 2-year Manufacturers Warranty (extends to 3 years when purchased with a Kicker amp kit |  | 41dxa1252
$129.99
|
AMPLIFIERS - KICKER AMPLIFIER | | |
| Description | Photo | Price |
KICKER 43CXA6005
CX600.5 Multi-Channel Amplifier
|  | 43cxa6005
$399.95
|
AMPLIFIERS - LOAD RESISTORS | | |
| Description | Photo | Price |
AUDIO CONTROL AC-LGD
load generating device & signal stabilizer
Today’s factory systems include more Class D amplifier technology which can mute, distort or emit damaging frequencies to your new aftermarket audio equipment when the factory speakers are removed. Using carefully selected resistors and a Zobel Network, the AC-LGD has been designed to generate load and stabilize signal from the factory system to ensure the best possible audio. The LGDs come in pairs and can be easily connected to your AudioControl Factory System Upgrade product with the pre-wired connectors. The LGD is installed between the factory speaker outputs and your line output converter or speaker level inputs on your amp or processor. Each LGD pair comes with standard wire colors for front and rear connections. |  | ac-lgd
$39.99
|
AMPLIFIERS - MONO AMP | | |
| Description | Photo | Price |
KICKER 44KXA8001
Mono subwoofer amplifier — 800 watts RMS x 1 at 2 ohms
| | 44kxa8001
$479.95
|
AMPLIFIERS - MOSCONI | | |
| Description | Photo | Price |
MOSCONI D2150-2-HARNESS
2 speaker out harness for 2 channel d2 Mosconi amps
| | d2150-2-harness
$45.99
|
AMPLIFIERS - PLANET AUDIO | | |
| Description | Photo | Price |
PLANET AUDIO AC15001M
ANARCHY 1500W Monoblock Class A/B Amplifier
1500 W MAX Power 1 Channel 1125 W X 1 RMS @ 2 ohm 563 W X 1 RMS @ 4 ohm Monoblock Class A/B, MOSFET Power Supply High and Low Level Inputs |  | ac15001m
$99.95
|
AMPLIFIERS - POWER BASS | | |
| Description | Photo | Price |
POWERBASS ACS-1000
1000 WATT AMP
|  | acs-1000
$259.95
|
AMPLIFIERS - PROCESSOR | | |
| Description | Photo | Price |
PAC AP4-GM61
Select 2014 - 2019 GM vehicles with BOSE
Factory sound system upgrade Time saving design Prevents need for summing and audio correction devices Reliable PAC quality Upgrade solution for factory, fixed level, data-bus controlled sound systems Time-saving design, prevents need for summing and audio correction devices Variable volume, fade, balance, bass, mid, and treble audio settings Retains OnStar, Bluetooth, navigation, safety systems, and all warning chimes Front, rear, sub , and center channel preamp outputs (5 volt RMS) Provides full range, flat audio output for a solid audio foundation Customized OE bass, mid, and treble center frequency selection Plug-n-play installation Remote sub level controller INCLUDED Optional TOSLINK optical output INCLUDED
Cars:corvette |  | ap4-gm61
$399.95
|
AMPLIFIERS - ROCKFORD FOSGATE | | |
| Description | Photo | Price |
ROCKFORD FOSGATE 3SIXTY3
signal processor
| | 3sixty3
$699.99
|
ROCKFORD-FOSGATE P1000X5
Punch P1000X5 5-channel car amplifier 75 watts RMS x 4 at 4 ohms 500 watts RMS x 1 at 1 ohm
Product Highlights:
5-channel car amplifier
75 watts RMS x 4 + 150 watts RMS x 1 at 4 ohms
125 watts RMS x 4 + 300 watts RMS x 1 at 2 ohms
250 watts RMS x 2 bridged at 4 ohms +
500 watts RMS at 1 ohm
CEA-2006 compliant
Features:
variable high- and low-pass filters 50-250 Hz,
12 dB/octave variable PEQ2 bass/treble boost
0-18 dB at 45 Hz and 0-14 dB at 12.5K Hz
switchable subsonic filter 28 Hz,
12 dB octave on subwoofer channel
C.L.E.A.N. gain setup system includes test tone CD
test tones also available as MP3 download
from Amazon On Demand, Rhapsody,
Google Play, and Spotify, labeled
3sixty.3 setup disc (Punch amps and the 3sixty.3
use the same test tone tracks for setup)
Class-BD amplifier design
frequency response: 20-20K Hz
Dynamic Thermal Management and
MEHSA MOSFET cooling systems
MOSFET power and output stages
preamp and speaker-level inputs
(speaker-level inputs require a
speaker wire to RCA adapter)
signal-sensing turn-on with speaker-level
inputs eliminate need for remote turn-on lead
More Info:
optional PLC2 wired remote level control with
clip light available 4-gauge power and
ground leads and an 150-amp fuse recommended
� wiring and hardware not included with amplifier
no onboard fuses � when installing multiple amps
in a system, an additional 150-amp in-line fuse
between the distribution block and the amplifier
is recommended
15-1/8 in W x 2-7/16 in H x 8-13/16 in D
warranty: 1 year
|  | p1000x5
$699.99
|
ROCKFORD-FOSGATE PBR300X4
Rockford Punch 300W BRT Full-Range 4 Channel Amplifier
The Punch PBR300X4 is a 300 watt full range amp designed for compact systems. This efficient amp packs a Punch in motorcycles, ATVs and hybrid-electric vehicles without sucking a lot of juice from your electrical system.
MOSFET output stage
2/4 channel input switch
12dB/octave Butterworth crossover
High level inputs
Ultra compact chassis
Variable 4 to 6 volt hi level DC offset voltage input turn-on control
1 year standard warranty |  | pbr300x4
$299.00
|
ROCKFORD-FOSGATE R600X5
The PRIME R600X5 is a 5-channel amplifier designed to run an entire car audio system! The R600X5 produces up to 75 Watts into each of its four channels with a dedicated subwoofer channel capable of producing 300 Watts into 2-Ohms.
Remote Punch Level Control - Sub Channel RCA and High level Input with 2/4/5 Channel Select 12dB/octave Butterworth crossover On Board Punch EQ Control Separate Front, Rear and Sub Gain Control Real time output and power supply thermal sensing Cast aluminum heatsink 4 Gauge power/ground connectors MOSFET power supply Over current protection Short circuit protection Muted turn on |  | r600x5
$399.99
|
ROCKFORD FOSGATE T400X2AD
400 Watt Class-AD 2-Channel Amplifier
| | t400x2ad
$309.95
|
ROCKFORD-FOSGATE T400X4AD
mini 4 channel amp
|  | t400x4ad
$549.99
|
